Legal Notice
Main Principle:
The general material into the heat exchange device through the centrifugal pump to get preheating, then after the high temperature barrel which is full of high pressure, the material is rapidly heated to the sterilization temperature and maintains for about 3seconds, the microorganism and enzymes are kills quickly. After getting out the high temperature barrel, the materials cool down by heat exchanging with cold materials, so the temperature is generally low than 65° C. If the next process needs to increase temperature, it can be done by adjusting the angle globe valve or circulation. Otherwise, cooling water should be access to low the discharge temperature. The discharge is controlled by throttle valve. Under a certain pressure, this valve can maintain the boiling point higher than highest temperature. Adjust this valve when normal production, the driving force from the pump overcome the spring pressure to form backpressure, and thus to control flow. Surely, it should be all open when cleaning this sterilization machine. Circular storage tank can be used for the preparation of acid and alkali solution, and clean the coil fouling in the inner wall effectively. Because adopting the stainless steel triplet cock, the flow can be adjusted suitably.

Main Features:
1. Continuous production makes short sterilization time.
2. Due to short heating time, quality products available.
3. Ultra high temperature makes ideal sterilization effect.
4. Linked with centrifugal pump and high-pressure homogenizer, application range is wide, and is suitable for high viscosity materials sterilization.
5. The heat exchanger in design can utilize waste heat, so that the steam consumption is small.

Main Parameters:

Model	KU10	KU20	KU40	KU60
Processing power	0.5-1T/H	1.5-2T/H	3-4T/H	5-6T/H
Sterilization temperature	115-135°C	115-135°C	115-135°C	115-135°C
Steam pressure	<0.4MPa	<0.4MPa	<0.7MPa	<0.78MPa
High temperature heating time	4-6S	4-6S	4-6S	4-6S
Discharge temperature	<65°C	<65°C	<65°C	<65°C
Motor power	2.2KW	2.2KW	4KW	5.5KW
Body size	920*920*1400	1100*1100*1700	1200*1200*1800	1400*1400*2000
Weight	280KG	380KG	550KG	700KG