Legal Notice
Main Principle:
This unit is consisted by main motor, spraying for compound material, hot-air-purifying, dust-removing and ventilating, and electric coating system etc. The plain cores of troche or pill are rotated in the coating cylinder following the sophisticated locus movement under the functing of stirring retainer, meanwhile, the spraying supply system is pressured to spray the coating medium on the plain corns automatically via the spray guns or the burettes. Meantime, the clean hot air supplied by the medium formed on the surface of the plain corns quickly. In the end, a layer of hard, thick and smooth medium is shaped on the surface of plain corns quickly.

Main Features:
1. The drum has a closed poreless structure and is equipped with a flow-guiding sheet. Tablets can make easy and smooth rotation without fragment and chipped edge in the drum due to mirror polishing of its wall and flow-guiding sheet, which greatly improves the yield.
2. During air intake, three times filtration involving primary filtration, medium filtration and high filtration, can reach 100, 000 level purification. During air exhaust, dust abatement can reach 99% by adopting a bag-type dust extractor. Equipped with a vibration damper, the machine is in normal run with noise lower than 75dB, which conforms to environmental protection requirements.
3. A specially designed air source exchange system features exchange of hot air an cold air depending on the technological requirements, the fan blade can be regarded as air inlet or air outlet. An eye pitch explosion-proof lamp is equipped in the drum so as to clearly view all material in run for the convenience of accurate control of technological change.
4. A cleaning system equipped at the bottom of the drum, with automatic computer-controlled drain after cleaning.
5. The specially designed imported spray gun features easy to operate and control relevant technological requirements, uniform density and particle size, uniform atomization and large spray area, practical to adjust flow, angle and sector, economization on dressing, free leakage and blockage. The gun can be in operation unless its head keeps in the range of 0.29Mpa to 0.39Mpa. It has been favourably reviewed from users at home and abroad.
6. PLC automatic control of such process parameters as negative pressure, air flow and temperature etc, automatic run of various process flow in sequence, instead of manual operation.

Main Parameters:

KU-75GKU-150GProductionCapacity75155CylinderSpeed(rpm)2-202-15PowerofMainmotor1.12.2Motorpowerofhigh-efficiencyfiltercalorifer2.22.2MotorPowerofdustremoverventilator35.5Overallsizeofmainframe(L*M*H)(mm)1350*1150*16501700*1320*2000Dimensionofhigh_efficiencyfiltercalorifer(L*M*H)(mm)1050*1050*19001200*1200*2100Dimensionofdustremoveventilator(L*W*H)700*700*1700900*800*2050Weightofhigh-efficiencyfilitercalorifier300400Weightofdustremoverventilator280300